Radar Graphite Vapor Waterski 2024

The Graphite Vapor features a polyurethane core in the body of a Vapor. Polyurethane is damper foam which allows the ski to sit a little deeper in the water and makes for more progressive turns. Those skiing in a mix of open water and slalom courses favor the Graphite construction between speeds of 30-36 MPH.

• AERO CORE - Forgiving and consistent response.
• SIGMATEX CARBON - Consistent flex every time.
• BIO RESIN - Plant based and better.
• RACE BASE - Earlier lines and easier turns.
• ENDURO TIP/TAIL - Built for speed.
• RADAR LAB MADE - Thanks Herb.

Shape
The wide spot on the ski has moved forward and width has been added from the middle of the ski through the tip. This gives the ski a more tip to tail taper and more support through the front part of the ski. The increase in taper presents the ski with a slightly more tip-up riding attitude and allows the ski to pull through the turn in a more connected, powerful way. The result is less body movement needed to get tight radius turns. The new ski also has slightly less volume in the tail. By reducing this surface area, the tail of the ski is able to smear outward while also staying planted in the water. Ultimately, the updates in shape help it to ride much closer to the ideal line for any given speed and rope length.

Rocker
The tip rocker on the new Vapor starts just after the wide spot. This relieves tip pressure and increases forgiveness, allowing a skier to have a bigger platform to stand on coming into the turn. This also helps keep the ski keep moving outbound in the transition and makes the ski incredibly more predictable in the turns it creates. Moving back from the wide spot, the rocker lines are all new. These new lines create a ski with increased tail rocker which softens the way the ski rotates or carves through the turn. The result is a feeling of increased angle from a wider place with an instant acceleration.

Concave
The additional concave depth running throughout the bottom of the ski is one of the most noticeable differences in this new shape. This channels more water directionally from tip to tail, resulting in significantly more side-to-side drive and holding power. More drive and hold allow a skier to be faster as they near centerline which results in a more up-course path. Another result from an increased concave is increased pressure on the bevels, allowing the ski to feel extremely connected to the water. This gives a skier the freedom to control the path of the ski with more ease.

Bevels
The front of the ski carries a sharper, more angular bevel design to harness the increased water flow from the new concave design. This gives the skier more ability to feel how the water interacts with the tip of the ski to create sharper, more predictable turns. In the tail of the ski, the bevel is softened, allowing the water to wrap around the bevel easier. The tip of the ski pulls harder through the turn while at the same time, the tail is able to smear while staying planted in the water. This feathered approach makes the turns feel much more natural and less forced.

Thickness
Sidewall height carries constant to provide balance for the increased lift created by adding width. In an effort to keep the ski nimble, sidewall thickness is reduced to produce the connected, tight turning radius of the ski.

Edge Angle
The Vapor width allows the ski to achieve maximum edge angle both in the turn and while cutting. This width sets the precedent in our line as the pinnacle of performance both in the course and while free skiing.

The Vector Boa packs a punch. Featuring Carbitex CX6 strips to give you ultimate response and a Boa reel to dial in your fit perfectly every time. You’ll be wondering where this boot has been your whole life.

• Boa Lacing System
• Carbitex CX6
• Wrap Tech Level 3
• Molded 3D Tongue
• Symmetrical Fit
• Feather Frame Chassis

**Rear Feather Frame only fits Radar Skis. 

Technology

Feather Frame Chassis
The Feather Frame Chassis stands on a pedestal as the only boot system to completely integrate the mounting system, baseplate and outer shell into a single component. This allows you to stand closer to the ski and offers a better connection.

Carbitex
Carbitex is a carbon fiber textile material that is more reactive than any other material on the market. This reactivity translates into an unparalleled connection to the ski.

Boa
The Boa integration into the boots offers an instant response found only in the Radar line. Transform your experience through a fast, customizable, and comfortable fit.

Intuition
Our exclusive partnership with Intuition gives you a heat-moldable, lightweight, pre-formed fit. Intuition foam ensures you have a perfect fitting liner for ultimate performance.

Wrap Tech
Wrap Tech fuses the external skeleton of the boot to the base textile layer which gives the boot the ability to conform to the shape of your foot, in turn giving you more response.