Underwater Gear

Supra | Moomba Rudder Assembly | 426 This is a complete rudder and rudder port assembly for Supra and Moomba Boats. This was used on many v-drive Supra Boats and Moomba Boats. Use the Boat Part Lookup to ensure you are getting the correct part for your...

Supra | Moomba Strut - 15 deg. 1" | 028 This is a 15 Degree Strut for a 1" shaft for Supra and Moomba Boats. Short Bore. Use the Boat Part Lookup to ensure you are getting the correct part for your Supra and Moomba Boat.  

Supra | Moomba Drive Shaft-48"x1-1/8" | 358 This is a 48" Drive Shaft by 1-1/8" diameter for Supra and Moomba Boats. ***Skier’s Choice couplers are pressed onto the shaft and the assembly is CNC balanced to improve performance and reduce vibration...

Drive Shaft 52.25" x 1-1/8" This genuine MasterCraft drive shaft is 52.25 inches long by 1-1/8 inch diameter with coupler. This drive shaft is specifically designed for MasterCraft V-Drive boats. Comes with a new prop nut and cotter pin. Designed for...

Supra | Moomba Rudder Assembly | 203 This is a complete rudder and rudder port assembly for Supra and Moomba Boats. This is the 105 Degree rudder assembly. Use the Boat Part Lookup to ensure you are getting the correct part for your Supra and Moomba Boat...

Mastercraft T-Handle Drain Plug w/ O-Ring MasterCraft T-handle Bilge Drain Plug is made of Nylon and is made for fresh or saltwater marine environments and is a direct factory replacement for MasterCraft boats built from 2006-Current. This plug is...

MasterCraft Triangular Transom Nylon Drain Plug w/ O-Ring This MasterCraft Boats Transom Drain Plug is made of Nylon and is made for a marine environment and is a direct factory replacement for most MasterCraft boats built from 2006-Current. This plug is...

MasterCraft, Supra, Moomba Center Drain Plug Assembly W/T-Handle This MasterCraft, Supra, Moomba T Handle Boat Bilge Drain Plug is made of brass for long lasting durability in a marine environment and is a direct factory replacement for MasterCraft boats...

Log Shaft Packing For 1 1/8" Drive Wax impregnated rope for drive shaft and rudder stuffing boxes. Each piece is 3/16 diameter and 4.5" long. The 3/16 shaft packing is designed for boats with a 1 1/8" drive shaft which is commonly found on MasterCraft,...

Log Shaft Packing For 1" Drive Shaft Wax impregnated rope for drive shaft and rudder stuffing boxes. Each piece is 1/4" diameter and 4.5" long. The 1/4" shaft packing is designed for boats with a 1" drive shaft which is commonly found on 2002 and older...

HOSE - MasterCraft DRIPLESS GLAND FORMED Dripless gland formed hose to be used with the Glide Dripless gland. Designed to be used with 1-1/8” drive shafts and MasterCraft boats 2005 and newer. Use the boat part look up below to ensure you are...

MasterCraft OEM Rudder- 652 This genuine MasterCraft OEM Adjustable Prostar Rudder is model specific. If you have damaged your rudder it is typical that your Rudder Port is also damaged along with other Under Water Gear. Use the Parts Finder to select...

MasterCraft OEM Rudder Port - 208 This genuine MasterCraft OEM Rudder Port w/Grease Fitting is model specific. If you have damaged your rudder Port it is typical that your Rudder is also damaged along with other Under Water Gear. Use the Parts...

MasterCraft OEM Rudder Port - 207 This genuine MasterCraft OEM Rudder Port is model specific. If you have damaged your rudder Port it is typical that your Rudder is also damaged along with other Under Water Gear. Use the Parts Finder to select your year...

MasterCraft OEM Rudder Port - 206 This genuine MasterCraft OEM Rudder Port is model specific. If you have damaged your rudder Port it is typical that your Rudder is also damaged along with other Under Water Gear. Use the Parts Finder to select your year...

MasterCraft OEM Rudder- 205 This genuine MasterCraft OEM 12" Bronze V-Drive Rudder is model specific. If you have damaged your rudder it is typical that your Rudder Port is also damaged along with other Under Water Gear. Use the Parts Finder to select...

MasterCraft OEM Drive Shaft 52.5" - 153 This genuine MasterCraft drive shaft is 52.5" x 1-1/4" diameter with coupler. This drive shaft is specifically designed for MasterCraft V-Drive boats. Comes with a new prop nut and cotter pin. Designed for boats...

MasterCraft Drive Shaft Coupler Nut- 3/4" Use the boat part look up below to ensure you are purchasing the correct part for your boat.  

Supra | Moomba Strut Bearing 1" ***THESE ARE SOLD INDIVIDUALLY, YOU NEED TO ORDER QUANTITY OF 2 FOR ONE STRUT*** Strut Bearing for 1" strut - 2" Long Use the Boat Part Lookup to ensure you are getting the correct part for your Supra and Moomba Boat...

  MasterCraft Strut Bearing 1-1/8" | 206300 This is the replacement MasterCraft Strut Bushing/Bearing for a the 200399 1-1/8" strut. Used from 1982-2014. 2 Piece set. Use the boat part look up below to ensure you are purchasing the correct part for...