Underwater Gear

  MasterCraft Strut Bearing 1-1/8" | 206300 This is the replacement MasterCraft Strut Bushing/Bearing for a the 200399 1-1/8" strut. Used from 1982-2014. 2 Piece set. Use the boat part look up below to ensure you are purchasing the correct part for...

  MasterCraft Strut Bearing 1-1/8" | 200137A This is the replacement MasterCraft Strut Bushing/Bearing for a the 200136 and 200137 1-1/8" struts. 2 Piece set, Blue Super Slick. Use the boat part look up below to ensure you are purchasing the correct...

Mastercraft Nylon 9" T-Handle Drain Plug Assembly The 9" T-handle drain plug assembly is made of Nylon and is made for a marine environment and is a direct factory replacement for the deep hull X-Series MasterCrafts. Use the boat part look up below to...

  MasterCraft OEM Rudder- 168 This genuine MasterCraft OEM Rudder is model specific. If you have damaged your rudder it is typical that your Rudder Port is also damaged along with other UnderWater Gear. Use the Parts Finder to select your year make...

Supra | Moomba Drive Shaft-42"x1" | 914 This is a 42" Drive Shaft by 1" diameter for Supra and Moomba Boats. ***Skier’s Choice couplers are pressed onto the shaft and the assembly is CNC balanced to improve performance and reduce vibration. The...

Supra | Moomba Brass Shaft Log - Thru Hull   Use the boat part look up below to ensure you are purchasing the correct part for your boat.  

MasterCraft OEM Strut - Starboard - 102 This genuine MasterCraft OEM Strut is model specific. Even a small bend in your strut can cause vibrations and long term damage to your drive shaft and possibly transmission. If you have a bent strut get your boat...

MasterCraft Boats Bearing- Strut 1" 6 Bolt The MasterCraft bearing is a genuine MasterCraft boat part for boats with a 1" strut with a 6 Bolt Mounting Pattern. If you are unsure of your boats drive shaft diameter please contact us with your boats HULL ID...

OJ Flex Gland Shaft Seal System 1-1/8" For drive shafts with 1-1/8" diameter. OJ Props has developed the first dripless shaft seal that does not require a water feed from the engine. Making retro fit installation much easier without the need for the...

MasterCraft Shim Set - Flanking Rudders NXT20  

  Harmonic Prop Puller (Prop Knocker) This is a universal prop puller and it will work with most major inboard and v drive boats including MasterCraft, Supra, Moomba, Correct Craft, and Malibu boats.   Don't let a bent prop ruin your weekend,...

  Supra | Moomba Strut - 15 deg. 1" | 028 This is a 15 Degree Strut for a 1" shaft for Supra and Moomba Boats. Short Bore. Use the Boat Part Lookup to ensure you are getting the correct part for your Supra and Moomba Boat.