Description
Rockford Fosgate M2 200 Watt 2-Channel Element Ready™ Amplifier
The M2 Series were developed for marine audio environments that feature UV resistant protection and special internal conformal coating that protect the electronics from water. It’s designed for those who want a reliable amplifier – with all the power and performance you’ve come to expect from Rockford Fosgate – at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being “under rated,” easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of M2 Series amplifiers are also designed to be easy to setup and configure, making them perfect for use in any application.
Features
- 2-Year Warranty
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- CEA-2006 Compliant & CE Compliant
- "Auto-Sense" turn-on with remote out (high level in)
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Conformal coated circuit board protects against dust and water
- UV stable powder coated cast aluminum heatsink
- Optimized using AudioGraph PowerCube measurement tool
- Integrated Power and Speaker Terminals
- Balanced Differential Inputs eliminates noise picked up by signal cables
- Integration with OEM and Aftermarket Radios
- Low Impedance Stability
- RATS (Rockford Automated Testing System) proprietary quality & performance tested
- Element Ready™ design protects against outdoor exposure
- Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power)
- Top Mounted Control Panel
- Short Circuit & Over Current Protection
- Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers
- Variable Infrasonic Filter
- Zinc Nickel-plated Marine grade brass connection terminals
- RCA pass-thru outputs
Specifications
| Cta-2006 Compliant | |
|---|---|
| Number of Channels | 2 |
| Total Power (Sum of Rated Power) | 200 Watts |
| Rated Power (RMS Continuous Power) | 50 Watts x 2 @ 4Ω 100 Watts x 2 @ 2Ω 200 Watts x 1 @ 4Ω Bridged/Mono |
| Dynamic Power (PVC/PowerCube®) | 60 Watts x 2 @ 4Ω 107 Watts x 2 @ 2Ω 215 Watts x 1 @ 4Ω Bridged/Mono |
| Bridgeable | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | Low-Level: 150 mV - 4 V High-Level: 450 mV - 12 V |
| Circuit Topology Class | Class D |
| Total Harmonic Distortion (THD+Noise) | 4Ω: <1.0% 2Ω: <1.0% |
| Signal Input | Low-Level: 2 RCA High-Level: 4-Pin Molex |
| Signal Output | Low-Level: 2 RCA (Pass-Thru active with RCA or Hi-Level input) |
| Tone Controls | No |
| Crossover Controls | High-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Low-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth All-Pass: Yes |
| Remote Controls | No |
| Visual Indicators | Power/Protect C.L.E.A.N. In C.L.E.A.N. Out |
| Power Wire Gauge | 4 AWG |
| Power Input Connector | Compression Terminal Block |
| Speaker Wire Gauge | 8 AWG |
| Speaker Output Connector | Compression Terminal Block |
| Cooling | Convection |
| Operating Voltage | 9 - 16 VDC |
| Recommended Fuse (not included) | 30 A |
| Max. Current Draw (13.8V Sinewave) | 18 A |
| Dimensions (H x W x D) | 1.9" x 6.8" x 8.1" (4.9 cm x 17.3 cm x 20.5 cm) |
