MasterCraft OEM Fuel Pump Module 202H

MasterCraft OEM Fuel Pump Module 202H

This is the Updated MasterCraft Fuel pump module. It will come with a new fuel filter attached. To avoid fuel leaks it is best to also replace the Fuel Pump Gasket along with the Fuel Pump Screws. This will require 12 Fuel Pump Module Screws. The Fuel Line Disconnect Tool is also needed by most who are replacing their fuel pump module on their own. This is used to disconnect the fuel lines from the pump itself. The Fuel Pump filter has changed with the new updated pump. The image shown should look like your previous pump that you are removing.

This includes the harness to connect the new style pump to the existing wire harness in your MasterCraft. 

A Fuel Pump is not a returnable item once it has been installed. Make sure this is your boats issue before installing the pump.

If you have replaced this pump in the past, you may not need the harness sold with this pump. If you have the harness from a previous pump you may purchase this Fuel Pump. 

Use the boat part look up below to ensure you are purchasing the correct part for your boat.