Fat Sac Permanent Epoxy Fat Sac Permanent Epoxy for Cementing any FLY HIGH fittings into the sacs for Auto Ballast Mix well Apply on threads of fittings going into Fat sacs

MasterCraft X-Star Ballast Upgrade Kit Deck your MasterCraft X-Star out with the same Ballast Kit that is used for the MasterCraft Pro Wakeboard Tour. This system adds #2500 pounds of ballast to the factory total of #1200 for a total of #3700 of ballast...

Fly High Pro X Series Black Floor Sac This Surf Sac is the ideal weight to have in the boat, and will fit and fill any V-Drive rear compartment, but will work in other areas of the boat and will give you maximum weight. The surf sac is also capable to...

Fly High Fat Sac Fitting W748 Fly High Fat Sac Fitting W748 - 1" Quick connect to barbed 1" fitting. If you are adding or modifying a ballast system, you are going to need some of these.

Custom MasterCraft Ballast Upgrade Kits These bags are custom designed to fit in 2006, 2007 or 2008 MasterCraft X-2, X-15, X-30, and X-45 wakeboard boats. Each bag adds aver 400 lbs. of ballast to help shape up your wake for monster air. That brings...

Fly High Fat Sac Ballast Fitting W743 Fly High Fat Sac Fitting W743 - 1" Quick Connect to Fat Sac Valve Threads

MasterCraft Ballast Tank 90 Degree fitting Threaded to fit into your existing hard tank. Great to use when adding extra ballast on top of hard tanks. Barbed end to fit 1" black ballast hose of MasterCraft boats. Use the boat part look up below to...

1" Suction Stop Quick Connect Ballast Fitting

The New Supa Tsunami Pump, Juiced Edition is here. This badboy is currently the most lightweight, fastest pump from start to finish pump out there.

The FATSAC V-Drive Wake Surf Sac fits perfectly in the compartment of your V-drive boat to produce a nice wake for surfing.  Try combining this sac with the FATSAC Fat Brick to help you control the shape of your wake.  This sac will also conform to fit...

After filling any factory ballast and FatSac that fill the front and rear compartments of your V-drive boat, put the Ultimate Wake Surf Sac on top of the rear seat and side seat that you are wakesurfing on for the ultimate surf wake.  This will displace...

Rear seat bottom/center locker sac. *Custom Color Upcharge - BLUE, RED, WHITE, or CAMO 650 Lbs. total ballast weight at recomended capacity.Dimensions: 62" L x 26" W x 10" H. Compatible with FATSAC Supa Tsunami Pump (no conversion parts needed)!

FATSAC Side Sacs fit along the side of the engine compartment on inboard boat...and they will conform to fit under the seats of open bow boats. They are designed to get more weight to the center of the boat to balance any ballast you may have aft of the...

Do you have a larger buddy who makes it difficult to balance the weight distribution in your boat?  The FATSAC Fat Brick will help you solve this problem.  This little thing weighs in at 155 Lbs. when full.  Its handles and compact size allow you to...

FATSAC Air Release Bag Plug W749 Ballast FittingAir Release Plug - Release unwanted air from your ballast bag without the mess!

FATSAC Flow-Rite 1-1/8" Elbow Quick Connect W746 Ballast FittingFlow-Rite 1 1/8" Elbow Quick Release Connector Ballast Fitting

FATSAC Check Valve Quick Twist Adapter W744 Ballast FittingFATSAC Check Valve System Fitting

FATSAC 3/4" Elbow Quick Connector W742 Ballast FittingFlow-Rite 3/4" Elbow Quick Connect Socket

Flow-Rite 1 1/8" Straight Quick Connect Socket

Female GHT Standard Hose - Male Quick Connect