JL Audio M600/6 AmplifierThe JL Audio M600/6 Amplifier is a 6-Channel Class D Marine Full-Range Amplifier, 100 W x 6 @ 2 O / 75 W x 6 @ 4 O - 14.4V This incredibly flexible amplifier packs a serious full-range punch, and delivers a staggering 100 watts to each of its six channels into 2 O (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexDÎÈ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency. With the M600/6, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 4 @ 4 O, or bridge four of its channels to create a staggered power four-channel amplifier with 200W x 2 @ 4 O to one pair of satellites and 75 W x 2 @ 4 O to a secondary pair of satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2. The M600/6 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four or all six of the amplifier's channel levels from a remote location. This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.
Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 O >150 / 50 Hz Damping Factor @ 2 O >75 / 50 Hz THD+N @ Rated Power <1% @ 2 O per Ch. Input Voltage Range @ RCA Inputs 100 mV - 4 V RMS Min Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuseÎÈ)